Focusing on flat products with continuous investment in plant and people means that we can offer a variety of finishes on multiple products. From small profiles at 600mm square up to large plates 12 metres long by 2 metres wide and 2 tonne piece weight, we have probably the largest capability range in the UK for mechanical polishing of stainless steel and other non ferrous material.
Multiple lines mean that we can produce your material to fit with you and your client’s production schedule ensuring no delay to the end product.
Our forty years experience of a Customer First approach, means that whether you have one sheet or a thousand tonnes we are Your Partner in Polishing.
Stainless steel sheet
Stainless steel sheet is cold rolled and available in two mill finishes; either 2B or 2R (more commonly referred to as bright annealed or BA).
Stainless steel plate is typically either cold rolled or hot rolled. Cold rolled material is usually available in thickness 4mm, 6mm and occasionally 8mm.
Stainless steel narrow coil is typically cut to width from larger standard sized coils. We can apply a variety of Grained Finishes onto coil from 100mm wide to 500mm wide with a maximum piece weight of 2.5 tonnes.
Flat and Square Bar come in a variety of standard widths and thicknesses but are usually 4000mm long. Produced from either hot or cold material, Flat Bar is either slit and edge rolled or sawn to width.
Blanks can be produced from cold rolled material in thinner gauges or in heavy duty plate. Typically the term is used to describe flat shapes smaller than one metre square.
.webp "pps lasercut profiles")
.webp?width=300&height=225&name=pps%20british%20stainless%20(1).webp)
.webp?width=300&height=225&name=living-wage%20(1).webp)