Blanks

Blanks can be produced from cold rolled material in thinner gauges or in heavy duty plate. Typically the term is used to describe flat shapes smaller than one metre square. We are able to process both the thinner gauge blanks which are often used in light manufacturing applications, or blanks such as base plates which are usually a minimum of 10mm thick.

Grain direction is often important so please discuss your requirements with one of our Sales Team who will also be happy to advise what finish is suitable for the end application.

A variety of Grained Finishes are available on blanks but depending on the blank size there may be some limitations.

We can apply the following finishes to Plate: Course Ground, Dull Buffed, Dull Polished, Satin Polished, 240 Silicon.

Get in touch

Trusted in these sectors

Get a polished finish that dazzles!

Enhance the quality and precision of your engineering projects with our exceptional professional polishing services.

Get in contact today

An abrasive finish with unidirectional grain to achieve a nominal Ra of 0.4µm.

An abrasive finish with unidirectional grain to achieve a nominal Ra of 0.8µm within a range of 0.6µm > 1.2µm. All finishes are measured and certified.

An abrasive finish with unidirectional grain to achieve a nominal Ra of 1.6µm within a range of 1.2µm > 2.4µm. All finishes are measured and certified.

An abrasive finish with unidirectional grain to achieve a nominal Ra of 3.2µm within a range of 2.4µm > 4.8µm. All finishes are measured and certified.